Your position:Home > Coast >

Aircraft Part Industrial Ultrasonic Cleaner With Electric L

Update time:2019-10-13

Our multi tank ultrasonic cleaning systems combined with the hot air dryer can be used as an effective part cleaning line by housing heated cleaning solution, cascading DI rinse water, and a final cascading DI rinse water with a final hot air dry step. The process would move from left to right: the parts would be cleaned, rinsed, rinsed and then dried.


The clean tank can be optionally equipped with pump filter systems which provide 5 micron filtration of the alkaline cleaning passivation solution. The common configuration shown is 3.5 gallon tanks, but any size tanks can be used in similar configuration use.


Ideal to clean rust,carbon,pait,heavy oil,fruit agricultural chemicals and other things hard to clean, without damage to parts inside tank.

Industrial ultrasonic cleaning mahine with filtration system, remove heavy oil from the surface.

Avoid re-pollution for your goods.

Liquid cycle can save cost and improve efficiency.


Structural Features: ultrasonic cleaning+ ultrasonic rinse + rinse + dry, continuous operation.
Control Features: ultrasonic cleaning control, heating control temperature.
Electrical Characteristics: split electrical control cabinet, ultrasound and rinsing can be sub-control air-dried.
Application Features: suitable for continuous cleaning; Cleaning, rinsing and drying can be completed

Machine equipment system includes replaceable transducer box and generator. The transducer box and generator can be both build-in or separate but work together to operate ultrasonic cleaning process with transducer box immersible mounted in fluid tank, one side or both side or bottom mounted inside the tank. The number and placement of transducers is selected to give maximum results in any parts cleaning tank with any cleaning load. Specification of tank dimension and transducer boxes are custom made available. Either for mould of parts cleaning can receive perfect cleaning efficiency. Stainless steel basket is optional.


Application in Diesel Particulate Filter washing car part and metel part as below.

Automatic manufacturing semi-product and product cleaning

Automatic repair cleaning including engine,gear box,connecting rod,oil pump,crust,disc break,turbo supercharger,fuel injector,gearing,bearing and other components

Cleaning product after processing by boring and grinding machines


Ideal for car parts washing, engine block cleaning,workshop sonic bath cleaning.

Ideal to clean rust,carbon,pait,heavy oil, without damage to parts inside tank with suitable cleaning liquid.


AGsonic 3 stage unit (multi-tank) ultrasonic cleaner machine

Industry Cleaning objects
jewelry Jewelry, diamond, gold, silver products,
machinery Moulds, precision parts, pressing parts, camera parts, bearing, hardware tools
electronics PCB board, electronic parts, TV parts, computer parts
Auto industry engine parts, gear box, shock absorber, auto nozzle, cylinder, valve
Dental& Medical dental tools, medical tools, injector, surgery tools, dropper, glass container
Plating& painting polishing parts, SUS cutter, tableware, plating
Food industry Oven tray, boiler, bottles, bottle cap, filters
Optical& watch maker optical lens, eyeglass, sunglass, metal, gold, jewelry, diamond, watch band, watch cover, watch hand
textile spinneret plate, rubber parts, plastic molds, toy
others seal, flapper, coins, pottery, bank card, IGBT

AGsonic make rinsing tanks and dryer tanks to dryer after rinsing, such as for tank capacity of 50L,100L,150L,200L or even bigger tank. Multi tanks with different functions by each unit work together to approach maximum cleaning efficiency.

Take 3-tank ultrasonic cleaner as example:

1st ultrasonic cleaning tank

2nd rinsing tank after rinsing(or add a second rinsing tank for thorough rinsing)

3rd dryer tank


Specification details as follows:

1st ultrasonic tank: installed with ultrasonic cleaning transducers to operate cleaning process by ultrasonic transducer vibration.

2nd Rinsing tank: It has a continues supply of water by supplying water from the bottom, and dirty liquid flow away from the surface of the liquid.

Specification details:


Model T-2048G T-2072G T-2144G
Ultrasonic Tank Dimension(mm) 550X400X350 600X500X450 1000X600X600
Rinsing tank dimension(mm) 550X400X350 600X500X450 1000X600X600
Max. Capacity 77L/tank 135L/tank 175L/tank
Construction Case SUS304 (Mirror shining image available)
Construnction Tank SUS304
Transducer Number 48pcs 72pcs 144pcs
Ultrasonic power(Max.) 2400W 3600W 7200W
Ultrasonic frequency 40kHz 40kHz 40kHz
Temperature range 20~80C adjustable    
Heating power 6KW 12KW 24KW
Timer 1~99h 1~99h 1~99h
Drain 3/4" Valve    
Lid & Basket Available, material: SUS304    
Cleaning Tank voltage AC220V/AC380V 3phase    
Generator Voltage AC110V / 220V 1phase    
Features With double tank for cleaning and rinsing.
With filtration system
Multi-direction castors with brake;
1 year warranty

Competitive Advantage:

FAQ:

Q: Why is Ultrasonic Cleaning so Efficient and Effect?

A: When cavitation happens near a dirty object, the vacuum action produced by those million of bubbles constantly imploding creates a tiny pressure wave that reaches deep into every nook and cranny of even the most delicate items. This tiny pressure wave dislodges and breaks up the dirt and other contaminants and gently lifts it away. The result is very fast and effective cleaning.


Q: Why Clean Parts with Ultrasonics ?

A: Delivering and using clean parts is not always obvious. Certainly, no one wants to handle a dirty part or install it into a critical machine, but dirt, debris and contaminants can cause problems for manufacturers and end users. From the merely frustrating to catastrophic, dirty parts can cause critical components to exceed tolerances and even fail damaging valuable equipment and property while contamination (everything from grease, oil and chemicals to viruses and bacteria) can seriously harm users.


Q: Ultrasonic cleaning can offer:

A: Non-directional cleaning - clean where the sound and solution go
Reduced or eliminated need for disassembly
Consistent results - non-operator dependent
Non-contact cleaning - only the soil is removed, not the substrate
High efficiency - cleaning multiple parts at one time

.

Quality Aircraft  Part Industrial Ultrasonic Cleaner With Electric Lifting Large Ultrasonic Washing Machine 1000L for sale

Aircraft Part Industrial Ultrasonic Cleaner With Electric Lifting Large Ultrasonic Washing Machine 1000L

AG Sonic Technology limited

AG SONIC technology limited is a collection of ultrasound technology research, ultrasonic product development, production, sales and technical services in a body's national high-tech enterprises. We have our own R&D department with the factory in Songgang, Shenzhen. Our engineers are engaged in the filed for more than 8 years, so we have our own improved PCB design for stable and durable industrial use. Not only standard ultrasonic cleaner, but also any non-standard can be designed by engineer.

 

Product offered:

●Household ultrasonic cleaner

●Tabletop ultrasonic cleaner (mechanical series, digital series, power adjustable series)

●Industrial standard ultrasonic cleaning machine

●Customized ultrasonic cleaning machine

 

Service offered:

ODM/OEM

If you have good idea of ultrasonic applications, we can help you to make it come true.

 

Our Market:

We sell ultrasonic machines to worldwide countries, and our professional team will offer you the best after-sales service. We believe after-service is as important as quality and price.

 

Our faith:

Only action can make the goal come true!

 

 

You May Like

Wholesale 4500W Industrial Sonic Cleaning Tank / Tyre Washing Machine With Pneumatic Lift from china suppliers

4500W Industrial Sonic Cleaning Tank / Tyre Washing Machine With Pneumatic Lift

Wholesale Wheel / Tyre Industrial Ultrasonic Cleaner Rust Removal With Water Heating from china suppliers

Wheel / Tyre Industrial Ultrasonic Cleaner Rust Removal With Water Heating

Wholesale Car Maintenance Ultrasonic Cleaner Industrial Use?, Ultrasound Cleaning Machine from china suppliers

Car Maintenance Ultrasonic Cleaner Industrial Use?, Ultrasound Cleaning Machine

Wholesale Heated Rust Removal Industrial Ultrasonic Cleaner With Timer And Separate Generator from china suppliers

Heated Rust Removal Industrial Ultrasonic Cleaner With Timer And Separate Generator

Wholesale Mold Remediation Industrial Ultrasonic Washing Machine?With Water Recycle System from china suppliers

Mold Remediation Industrial Ultrasonic Washing Machine?With Water Recycle System

Company Info.
AG Sonic Technology limited
Verified Supplier
View Contact Details
Product List
Aircraft Part Industrial Ultrasonic Cleaner With Electric Lifting Large Ultrasonic Washing Machine 1000L Aircraft Part Industrial Ultrasonic Cleaner With Electric Lifting Large Ultrasonic Washing Machine 1000L
    1. Adjustable ultrasonic power
    2. Original BLT type transducer
    3. dual frequency 40 and 120khz for different cleaning items, gentel but powerful
    4. SUS304/316L tank
    5. Adaptable for continuous operation
    6. Adjustable thermo controller
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request Send your message to this supplier